Showing posts with label winter maintenance. Show all posts
Showing posts with label winter maintenance. Show all posts

Sunday 7 March 2021

Pre-Flight Tests: winter motorcycle maintenance

Ignore the giant pile of snow outside!  It's actually supposed to go above zero this week.  One way or another I'll be on two wheels in the next five days!  Next week there's 30cms of snow coming, but there is an opening in the never-ending Canadian winter of COVID and I intend to take it!

With everything back in place, the Tiger came off the bike stand for the first time since December and the wheels didn't fall off, so that's a win.  I'd hoped to start it and test how everything went back together but the new battery is taking a while to charge.

Last summer I purchased a new battery for the Tiger but it didn't come for the better part of 3 months and I didn't want to activate it when the bike was about to be parked for four months, so it's been sitting in the front hall in the box.  I put the acid in it today and got it charging.

The acid installation is pretty straightforward.  They give you the liquid in a series of attached sealed plastic tubes and you simply 'inject' them into the top of the battery and let them drain over 20 minutes.  You then use the provided caps to seal the battery.

Tomorrow will be motor tests on both bikes and then a short ride with each (I hope) to shake down any issues.  The Tiger was down to its nuts and bolts this winter so I want to make sure everything is tight and together before I put any serious mileage on it.

The Honda has been cleaned and covered since its last ride in November, so it should be ready to go.  The battery's been on the trickle charger inside all winter.  One way or another I'll be out on a bike this week.  It feels like finally being able to take a breath after four months of holding it.


TIGER WINTER MAINTENANCE:

  • New indicators that suit the bike better (tougher metal construction too)
  • Chassis taken down to nuts and bolts for a complete service
  • New HEL brake lines
  • Flushed brakes
  • New Michelins installed (myself!)
  • Fuel Injectors cleaned
  • Fork oil changed
  • Cosmetic repairs

FIREBLADE WINTER MAINTENANCE:

  • oil change
  • everything cleaned
  • deep carb cleaning (with disassembly)
  • battery tending inside over the winter
  • throw a blanket on it


Saturday 26 December 2020

Triumph Tiger 955i Fork Reassembly and Installation

I was looking at nearly $70CAD to get the 'special Triumph Tool' for tightening the locking nut on the triple tree.  That special tool consists of two bits of machined metal the same thickness as the nuts and seem absurdly expensive for what they are (maybe they're made out of gold and I'm just being stingy).

My cunning plan was to get a set of big deep sockets ($66 from Amazon) and an adjustable slip nut wrench from Canadian Tire for $16.  For twelve bucks more than the bizarro Triumph tool I'd get a socket set of sizes I don't have (29-38mm!) and a weird adjustable wrench for thin big nuts that didn't cost me nearly seventy bucks.  I had to take a millimetre off the slip nut wrench thickness wise, then it fit like a charm.  The long socket fits over the top of the triple tree so I was able to tighten the top 38mm nut against the one underneath using my improvised kit that cost a bit more but included 8 other hard to find big, deep sockets.

It worked a charm and held the lower nut tight while I dropped the big'old 38mm socket on the top one and tightened against it.  If I ever need a big weird thin adjustable wrench I have one in the toolbox now.

The steering always felt fine but having cleaned up all the bearings and put a not-stingy-factory amount of grease on there before putting it all back together has made it silky smooth by comparison.  The bearings were in good shape after a visual inspection but the cleanup and heavy greasing have really improved things.

I put the gaitors back on the forks.  I initially thought I'd have to replace them but a soak and scrub in hot, soapy water followed by a drenching in ArmorAll seems to have brought them back to life.  They were kinking where they shouldn't and were starting to look untidy, but the scrub/soak means I should get at least another year or two out of them, which is good because they aren't cheap and they're bloody hard to find.

The rejuvenated forks with new 15 weight oil (I'm 6'3" and 240lbs) look fantastic back on the bike.  It always surprises me how dark and opaque the fork oil is when I empty it out after a couple of years use.  It might not be dealing with combustion but it's still got a tough life.  I think a 2 year rotation of fork oil is going to be the new normal.



With the top clamp out I couldn't help but want to have a go at the spotty paint on it.  I'd hand painted some flat black rust paint on it a few years ago when it started to get scabby (it has a tough life over engine heat and with keys and other things banging off it).  That flat black was a quick fix and bugged me since I see it a lot in the saddle. While it was out I was able to mask off the top clamp and paint it up - disco blue metallic.  Why be dull.  Looks great with all the cleaned up fasteners, and it'll match my repainted hand covers (which I still have to hand paint some magic back on).

Next up is installing the Hel brake line kit I've got waiting to go in (Bike Magazine convinced me that anything this old shouldn't be depending on old, factory rubber lines).  The Tiger was due a brake fluid change anyway so it's a cost cut into regular maintenance.

The Hel lines come fantastically packaged (many stickers!) and include all the bits and pieces you need to install them.  Next up will be draining the brake lines and upgrading them, then the front end can go back together.


In other news, I got the old tires off with the spoons.  I'd describe this as more trouble than it's worth - next time I'll go see Lloyd at my local motorcycle shop and have him do them.  I couldn't get the new tires on the rim so I took them in to school and our auto-shop teacher gave me a hand mounting the new ones (new inner tubes too).  That was problematic too as we couldn't get the rear to sit on the bead (it stuck on the inner one).  I was finally able to get it to pop on with 60psi and some soapy water at home.  All that to say the tires are ready to go back on too.

Once the front brake lines are on I'll rebuild the front end and it'll be fully updated and /or maintenanced.  It'll then be time to do the same thing with the back end.  It'll be my first swing arm and rear suspension service so I'll be learning as I go.

There is some good advice on Tiger servicing at http://tiger955i.adrianmolloy.com/Tiger_Servicing.html   He did Hagon shocks on his Tiger (a good future project) and he has a lot of helpful tips on there too, for example: the Haynes manual suggests removing the exhaust but he suggests removing the swingarm and rear shock together, which I need to do anyway if I'm going to service it.

Those Hagon shocks can be custom built to rider size, which will help me since I'm not in the average size range.  I just had a look at the site and they'll do me two custom front shocks and a rear shock for about £1000 (about $1750 Canadian).  If the Tiger becomes a life-long bike I'll make that commitment.  It's not cheap but it's still less than three new car payments (or a new bike).  That they're customized and include life long warranties and repairs is useful on a long term machine.

With any luck I'll have the front end sorted and reassembled by the end of next week while I'm off work.  I can then get into the swingarm and rear chassis maintenance over our January COVID lockdown.  It's good to be busy in the garage when I can't be travelling and riding during this long, strange and stressful winter.

I'd rather be doing this, but working on the thing that lets me do this makes the riding gratifying as well as thrilling.  The deep familiarity I'm gaining with long term ownership is next level.

FOLLOW UP:  It all went back together nicely.  I'm on to swingarm and rear suspension maintenance next.





Wednesday 19 February 2020

Mid-Winter Motorcycle Maintenance: Triumph Tiger Front Brakes



It was a busy long weekend in the winter maintenance garage.  In addition to going over all the electrical connectors on the Tiger, I also did the front brake pads, which weren't making any noise, but after last year's noisy rear brakes forcing a change during the too-short Canadian riding season, I figured some preventative maintenance was in order, and good thing too!  You can see the metal noise strips just becoming visible in the photo.

The brake change was pretty straightforward with the caliper pin cover coming off with a bit of heat and the rest of the pieces coming apart with no problems.  After cleaning up the metal spring pads with a wire brush and thoroughly cleaning the calipers, everything went back together with minimum fuss.  The caliper action was nice and smooth and they willingly got pushed to full open to accept the new pads.  After a couple of pumps of the lever everything was tight and grippy again.  I managed to find the types of caliper I was looking for on Fortnine, and they happened to be orange and look good on the Lucifer Orange Tiger.

The only real pain were the brake master cylinder cover bolts.  The first one came out easily enough, but the second didn't want to come no matter what I did.  Eventually a hammered in Phillip's head screwdriver and some heat cracked the bolt's grip and out it came, but it's pretty mangled.

I was able to find that the bolt is a countersunk M5x16mm bolt.  It's a pretty common thing so I'm hoping I don't have to order it online and can pick one up locally.  It's probably too much to ask to find one that's got a nice coloured, metallic finish.

That covers what I wanted to get done as far as winter maintenance goes with the Tiger.  Other than the brakes and a clean and grease, it was all about the LED indicator upgrade.  Next year it'll be a swing arm removal and chassis grease and it'll have been several seasons since I last did the brake fluid and coolant, so that's on the future list too.  Now it's just the long wait for spring and a chance to get out and ride again.

In the meantime the Honda Fireblade Project is also in pretty good shape.  The carbs are sorted, as is the petcock.  I'm only waiting on a break in the weather to test everything.  In the meantime I've got another set of the LED indicators waiting to go on, but I'm tempted to wait on that as long as the stock ones work.


Monday 31 October 2016

Hibernating a Motorcycle: Oil Changes

That ain't a cheap oil change, but as expensive as it is,
it's way cheaper than rebuilding a motor.
In a previous life I was an automotive technician and then service manager at a Quaker State shop.  For a few years there I was right up on my lubricants.  That background makes me very conscious of my motorbike fluid habits.   One of my standing rules when I put away a motorcycle for the winter is to change the oil before I do it.

You watch someone like Nick Sanders ride up and down the Americas for tens of thousands of kilometres and you wonder how his Yamaha looked like it had barely been used at the end of it:




Engines are designed to be running.  The very worst thing you could do is start and stop an engine over and over again (like we all do every day).  In the case of Sander's epic rides from Alaska to Argentina and back, while what the Yamaha did was astonishing, the fact that the engine was in good shape shouldn't have been a surprise.  It was barely ever allowed to cool down. 

Oils become acidic and moisture seeps in as things continually heat up and cool down.  Leaving old oil in your engine over the winter isn't doing it any favours.  Swapping out contaminated oil for clean oil before you put it away is a great idea, so your engine isn't soaking in the bad stuff.


Swapping it again in the spring is just a waste of money.  Oil doesn't go bad sitting, but once you're into the heat up cool down cycle again keep an eye on your mileage, and keep up on your oil changes, your engine will appreciate it.

Chemistry is where the big advances are happening nowadays.  Today's oils have astonishing temperature ranges and abilities.  Here are some links on what's going on with lubricants:

http://www.motorex.com/index.cfm?oid=1993&lang=en
http://www.bp.com/en/global/corporate/bp-magazine/innovations/reinventing-the-oil-change.html
http://www.edmunds.com/car-care/stop-changing-your-oil.html
https://mobiloil.com/en/motor-oils/mobil-1/mobil-1-4t-motorcycle-oil
http://www.machinerylubrication.com/Read/475/oil-breakdown


Sunday 24 January 2016

Plugs, Calipers and Frozen Feet

The spark plug (bottom right) is easy to get to once
you remove the distributor caps mounted to the frame.
Yesterday began with a spark plug change on the Concours.  There are two (for lack of a better term) distributor caps (CoG got me sorted, they're coils!) in the shape of cylinders attached to the frame under the fuel tank.  Removing these makes for a fairly straightforward spark plug swap.  Someone had been in here before as one of the distributors wasn't properly attached to the frame (the rear bolt was seized).  With the unit removed it was relatively easy to free everything up in the vice.

I used to be pretty good at gapping plugs by eye, but I hadn't done it in a while.  I got better as I worked through the plugs and the last one only needed a minor adjustment.  The plugs all came out without issue and the new ones went in by hand and then got torqued to spec (14Nm).
The two middle plugs are tucked in behind the radiator and don't collect much road cruft.  The two on the outside
have a tougher life.   Other than being filthy, the plugs didn't show any internal issues.
With the plugs sorted and the under tank electrics cleaned and seated properly, I turned my attention to the rear brake caliper.  I've got a replacement metal brake line, so the old rusty rubber one is going in the spares bin.  The caliper came apart quite easily.  The rear brake on the Concours has always been excellent, but was starting to whine as the pads got thin.  With nothing seized and the main bits just needing a good cleaning, I think this will go back together nicely with new pads and brake lines.  I'd meant to order a caliper rebuild kit from Canada's Motorcycle, but my order got mixed up with a bearing puller I didn't need.  At least now I can tell you how good their return process is.


follow-up:  I requested a return on January 24th and got a shipping label in a reply email a day latter (which I thought was good).  I sent it off that day.  I just got a confirmation email today (Feb 3 - 10 days later) saying it will be another 3-6 days before I see a refund... and I'm charged seven bucks for returning it.  Compared to motorcycle-superstore.com's over the top customer service (immediate, free returns, what can we do to prevent this happening in the future?), I'm left thinking twice about shopping on canadasmotorcycle.ca.


While I'm waiting on the rear caliper rebuild kit I can do the fronts, which is what I'm aiming to get done today.  It's officially frickin cold outside (-20°C overnight, -12°C now), and even with the thick rubber mats I've got down in the garage and the heater going, I still ended up with foot cramps from the cold at the end of three hours in there yesterday.  Winter in Canada can get pretty tedious.  This is one of those days.  If someone called and said they could fly me somewhere warm to ride a bike next weekend, I'd be in heaven.

The two cylindrical distributor caps (COILS! bottom middle &
top right with the spark plug wires coming out of them)
are held down by two bolts.  Once removed from the
frame spark plug access is straight forward.
A longer view of the spark plug.


Wednesday 20 January 2016

Naked Concours

The Concours is a naked thing at the moment.  I'm under the fuel tank for the first time since I bought it.  I'm going after the spark plugs, but neither of my imperial spark plug removers would fit.  Kawasaki uses an 18mm metric socket.  Fortunately, Canadian Tire had that very thing in stock.

With the plugs changed it'll be time to start putting it back together.  I'm cleaning electrical terminals and torquing bolts to spec as I go.


The wheels are off, stripped and cleaned and ready for reconditioning at Fireball Coatings.  I'm hoping to get them over there this week.





What twenty year old Concours rims look like after you've had a go at them with SOS pads for an hour.

 
They're off to Fireball for a two stage gold/candy coat finish.  They look better than they have in years already, I can't imagine what they'll look like when I get 'em back!






The stripped bike is letting me get to pretty much everything.  I found the two cut-off gas tank ventilation pipes, which will get properly re-attached again.



Last but not least will be calliper rebuilds and braided metal lines for the rear brake and clutch (which have been waiting until some down time to install - I was loath to do it while I could be out riding).

It will all go back together on new tires and renewed rims ready for the season to begin as soon as the rain washes all the salt and other winter crap off the road.

If I lived somewhere more temperate I'd need two bikes so that I could rotate one out of operation for this kind of work.  Canada obliges by making it miserable outside for four months of the year.

Sunday 22 November 2015

Snow's A Fallin'

It's accumulating outside.  While that's happening, I'm in the garage busy stripping the Concours down to its underskirts.

Once that's done I'll give it a final cleanup before getting into the brakes and bearings.  While the wheels are off I'm going to look into getting them refinished.  Fireball Performance in Erin does wheels, so I'll see if I can drop off the rims while they're off the bike.  I'm curious to see just how magical a transformation that can be, and what it costs.


The partially stripped Concours.  It made me wonder what a stipped Connie would look like... pretty fantastic as it happens:



Strange that I've been through the Yamaha's carbs in detail, but never the Connies...


With her skirts off, the Concours still looks good for a 21 year old motorbike that spent too much time outside.  A drop of
coolant on the back of the block has me in full suspicion mode - I'm hoping it's a bit of overflow splash, but mechanic's
skepticism tells me it'll be a leaking water jacked and a lot of gasket work - the coolant reservoir isn't low...


Friday 14 March 2014

Putting The Ninja Back Together

We had our first above zero day this week and I giddily began rebuilding the Ninja thinking that I'd have a chance to take it out soon.  It's been snowing all day today and all hope it lost, but when the sun was out I could finally get to the paint touch ups needed.  The insulated garage isn't ideal for painting if the outside temperature is under minus ten Celsius which it has been for most of the winter.


On my first day of spring I popped open the garage door and touched up the headlight cover and fuel tank, both of which had imperfections in my initial paint application.  Now that they're clean and perfect, I can rebuild the front end.


With the temperature up the paint cures on the body panels very smoothly.  It needs to be well above 10° Celsius for the paint not to bead and bubble on the surface.  The front fairing and fuel tank lay in the warm March sunlight and cured perfectly - it was about 20°C.  The Rustoleum paint on the right covers fantastically well.   If you're looking for paint that will cover smoothly on plastic and metal, this is the stuff.


I'm going to two tone the air intakes on the fairings following a design that more current Ninjas use.  Unfortunately I didn't heed my own advice and I rushed in there yesterday morning when it was still too cold and the paint beaded.  Today I'm going to be sanding it down so I can get a smooth coat on in the heat.



It was nice to have the garage open and to be finishing up the winter repairs, maintenance and body touch ups.  It's supposed to be a warm (by warm I mean above zero) day again today.  With the insulated shop and the sun shining in I should be able to finish up the paint and begin to rebuilt the frame on the bike.

While casting about for a fairingless streetfighter option for the bike I came across some cheap options for replacing fairings.  I'd still like to try and source some of the bodywork from the fairingless ER6N, but it wasn't available in Canada in 2007 and I'd have to go to Europe to find the pieces.  It looks like the fairingless bike has small plastic covers over the coolant tank and that's about it.