Showing posts with label motorcycle track day. Show all posts
Showing posts with label motorcycle track day. Show all posts

Thursday 21 August 2014

Track Day Dreams Part 2

For a first trackday using an intermediary like Pro 6 Cycle gives you the support you'd need to ensure your bike is prepped well (they have tires, mechanics and other bits and pieces on hand).  Pro 6 runs track days at Calabogie Motorsports Park in Eastern Ontario.  It happens to be on the other side of some of the best riding roads in Ontario, and on the way to my buddy's house in Osgoode.
A couple of hours at speed on the highway and I'm up past
Gravenhurst and turning toward the Haliburton Highlands!
For me the trip is a Southern Ontario grind out and up the 400 before turning east to face some of the nicest roads in Ontario.  Giving three hours for the highway part, I'd aim to meet up with Jason somewhere in the highlands and then we could ride the twisties to Calabogie.

Day one would get me into the Highlands.  Day two would be riding twisties.  Day three would be the track day at Calabogie and Day four would be the return ride home.

To prep for the track day I'd swap out coolant for distilled water at home before the trip and practice stripping the bike down (covering and disconnecting lights, removing mirrors).  I'd also strip the bike back as light as possible, removing the passenger pegs for single pegs, the toolkit, any extra attachments at all.

I'd get a big duffle to carry my gear for the track day (I'd carry rain gear and clothes in a separate, smaller bag).  The track duffle would have to be big enough to carry track leathers, tools, a bike stand and the parts needed to prep the bike.  The idea would be to get to the track and be able to open up the bag and prep the bike quickly and efficiently.

The trackday bag would open up trackdays around Ontario, and once I'd experienced how the pros at Pro 6 Cycle do it, I'd be able to prep better for future days.

I'm a ways away from this at the moment.  Here's a wish list of needed bits and pieces:



A Vicious Cycle
Firstgear-Torrent waterproof duffel = 40l... should carry everything needed for a trackday...

$84






motorcyclesuperstore.ca
Alpinestars S-MX-5 Boots




$264




motorcyclesuperstore.ca
Alpinestars GP PRO one piece leather suit
Size 50 - this one's a bit tricky.  I'm everything from a 2-4x (tall, long in the body, shorter in the leg and triangle shaped)
$857 (on sale!)

A full body suit is going to be a tricky proposition off the rack.  There are some custom options out there, but you're buying from the other side of the world and I imagine returning a poorly done suit would be next to impossible.  That TopGearLeather site offers custom race suits for less than the off the rack retail suits (~$600), but caveat emptor (they may be awesome, I don't know).




motorcyclesuperstore.ca
Alpinestars GP PLUS gloves


$190








motorcyclesuperstore.ca
Schuberth SR1 Stealth Helmet



$950






motorcyclesuperstore.ca
Vortex V3 rear bike stand


$90 (+$70 wheel kit)






So I'm looking at about $2600 worth of riding kit before I even start considering the bike, and I'd want to consider the bike.  I'd start with the current Ninja 650r and build up experience and certifications, but I'd eventually like to get into The Vintage Road Racing Association.  The dream would be race prepping a 1980s Honda Interceptor (strip lights and extras, whittle it down the bare minimum, race prep the engine), and race it!



Racing ain't cheap.  I'd be dangerous if I had a lot of money and free time on my hands.  Since the summer's almost over and I'm back to the classroom, I'm hoping to put together (Kijiji, ebay, whatever cheap alternative I can find) the bits I need to get myself on a track next year.

If I can't arrange the equipment, I might (make a big) ask for the Racer5 3-stage introduction program.  It's one hell of a birthday present, but if supported track days cost you about $250 a pop anyway, paying an extra hundred to rent someone else's bike and get close instruction seems like one hell of a deal.

LINKS
FOLLOWUP

I tried on the Joe Rocket race suit at Royal Distributing the other day.  It was a 46.  It fit at the shoulders and waist/legs, but it was too short in the body.  If I were proportioned properly I'd be about 5'11", but with this long body I'm 6'3", my inseam is only 32".  I'm hoping a 48 is a bit longer in the body, and would be a loose fit everywhere else.  I wish there were more local places I could go try race suits on.  If RD gets a 48 in, that might end my quest for a suit for now.

Thursday 31 July 2014

Track Day Planning

I'm pretty keen to go do a track day, and I have a buddy who is the same.  The Grand Bend Motorplex does motorcycle open lapping on its track.   I found GBM through motorcycletrackdays.ca.  The upcoming SOAR racing event at Grand Bend offers open motorcycle lapping prior to their weekend events.  That might be a good time for two nØØbs to go as there will be experienced track day people on hand to help us fumble through the technical inspection.

I figured it would be a show up on what you rode here on and go on the track, as you would with a car, but bikes seem a bit more involved.  Here is the list of motorcycle specific technical requirements:
  • Is your kickstand secured? Your spring return isn’t enough on a racetrack. Use a plastic strap tie or duct tape to secure your kickstand in the up and locked position before you come to tech. 
  • Tape over your speedometer. It’s the rule.
  • Make sure your throttle returns quickly and positively. We want to see it snap back when you release the grip. 
  • Change your antifreeze for straight water. If your bike puts antifreeze on the surface, it shuts the entire track down and may result in suspension. Antifreeze is 100 times worse than water on asphalt (It’s like wet ice). Swap it out for water before you proceed to tech. 
  • Tape over or remove lights, signal and mirrors. They all shatter and they all puncture tires. 
  • Brakes: Make sure they’re properly functioning, front and back, with no leaks, because we’ll check. 
  • Chain: Check your drivechain adjustment. Too tight or too loose means breakage. Refer to manufacturer’s specification. Also, check your master link. A rivet style link is preferred, but a standard ‘slip on’ while suffice if you put a dab of silicone on the key to secure it. 
  • Now that you’ve ensured your brake lines don’t leak, check the rest of the bike. Your engine and suspension components must also be leak free. 
  • Overall track worthiness: These are the small things that can lead to disaster. Loose lines can snag. If it can flop around, it can be snagged and lead to a crash. 
  • Body: All body parts must be secured or removed. 
  • Mechanical: Check your fasteners and ensure they’re secured at recommended torque. 
  • Tires: Properly inflated, with structural integrity intact (sidewall, tread, steel-belts, bulges).
Most of that is common sense/maintenance, but there are a couple of bits that will require some thought.  Tying up the kickstand is all well and good, but that means you're bringing a rear stand to keep the bike upright.  Swapping out the antifreeze also means you need to bring some distilled water.  Some tools, disposable gloves and fluids would probably be a good idea too.  Suddenly the back of the bike I want to ride to the track day is looking like a hardware store.  You wouldn't want to ride an hour and a half to a track to find out you don't have what you need to go around it.  Short of asking for a pit crew to accompany you in a four wheeler, riding solo to a track day seems difficult if not impossible.

Of course, this leads you down the road to a trailer, which then begs the question, why use your road bike for track days when you can pick up an older sport bike for not much, not have to pay for road insurance on it and spec it out specifically for track days.  Stripped of lights and needless accessories like rear foot pegs and indicators, you'd be ready to ride as soon as you roll it off the trailer, and the machine would be tailored for the track.

I've been to several racing schools, but the one time I really got into it was while living in Akita, Japan.  Kyowa Race track was a small carting track deep in the mountains south east of the city.  Kazutoyo, a student of mine, was an avid racer (he came to Canada for a summer to participate in a Mosport racing mechanics program).  We'd go up there half a dozen times in the summer and spend the day hauling the carts around that bendy circuit as quickly as we could.

The vehicle of choice for the carts and the paraphernalia that went with them was a cargo van.  We'd be able to fit three people, the tools, the disassembled cart and spare tires and other odds and ends all in the van and head to the track.  Riding around at break neck speeds was awesome, but I have fond memories of all the fettling that when on in the pits too; it's all part of the race experience.

Ford Canada's handy Transit Van Builder got me all
set with a customized utility van that could carry two
bikes and gear with ease... things I'd do if I were rich!
Now that I'm thinking about doing a track day on two wheels I'm tempted to imitate those Japanese carting guys and get what I need to make a track day possible.  I've been wishing for a trailer several times this summer to haul lumber.  Having one on hand and a vehicle to haul it would be handy for more than just track days.  

Or just win the lottery and get the full on racing support van.

If Mechanical Sympathy were to go full on into racing, I'd grab that 1000cc VFR from Angus (in my Transit race van) and prep it for racing.  Stripping off all the lights and extras and minimizing it down to a race bike.  I'd be a dangerous man if I had more money.

In the meantime I'm still trying to look for ways to ride my Ninja to the track and do some laps without dragging along someone in a cage to support the activity.

Links:
Motorcycle track day primer: a good explanation of track days.
Beginner's Guide to Track Days in Ontario: a great checklist on how to approach track days - renting a bike is what I'm now looking into...